LoopVault

FLAC vs WAV vs MP3 Time-Stretch Artifact Comparison

Psychoacoustic codecs like low-bitrate MP3 discard masked harmonics that become audibly metallic once stretched by a time-pitch DSP engine.

Active Tempo
66.0 BPM
Tape Rate
55%
Total Pitch
+0.0c
Freq Ratio
1.0000x
55% (0.55x)
Semitone Shift+0 st (0c)
+0 cents
A=440.0 Hz (+0.00c)

Formula: 1200 * log2(refHz / 440). Matching a tape recorded at A=432 Hz requires -31.77 cents.

Speed-Ramp Drill Schedule

8 steps / 16 loops
StepSpeedBPMReps
#0165%78.02x
#0270%84.02x
#0375%90.02x
#0480%96.02x
#0585%102.02x
#0690%108.02x
#0795%114.02x
#08100%120.02x
Reference Case Exact Value Rehearsal Note
WAV (16/24-bit PCM) 1411 kbps Zero codec artifacts down to 25% speed
FLAC / ALAC Lossless 700-1000 kbps Bit-exact PCM decode at half file size
AAC / M4A (256 kbps) 256 kbps Clean down to 60%; light transient softening below 50%
MP3 (128 kbps) 128 kbps Audible cymbal phasiness below 70% speed

Practice Notes

  • WAV and ALAC/FLAC decode to bit-exact PCM samples before entering the on-device time-pitch DSP engine.
  • 128 kbps MP3 files exhibit audible pre-echo on cymbals and acoustic guitar transients below 70% speed.
  • LoopVault imports FLAC, WAV, ALAC, M4A, and MP3 directly from local Files with zero cloud transcoding.

More Practice Reference Presets